Basic Low Pressure Nitrogen Purge Alarm A333-N2R

$675.00

NFPA 99 mandates the continuous monitoring of purge gas during the brazing process, by means of an audible alarm, a pressure regulator and flowmeter.
The A333-N2R meets these requirements. The complete unit offers an alarm with both visual and audible signals, and a combination regulator/ flowmeter.

AVAILABLE FOR THIS PRODUCT: HEAVY-DUTY, WATERTIGHT & IMPACT RESISTANT CASE. SOLD ON THIS SITE.

 

 

 

Description

Our A333-N2R Nitrogen Low Pressure Cylinder Alarm with Regulator Flowmeter.  The alarm pressure switch is oxygen-cleaned with a set point range of 30 psi low to 600 psi high.  The alarm as set from Med-Con is 200 psig +/- 5 percent. Special order set points are available.  There is a Green blinking “OK” light when gas supply is adequate and a Red blinking “LOW” light when gas supply is low.  In addition, an audible alarm (90 dB) activates when purge gas is low.  The alarm operates on a 9-volt battery, included, which can give up to a year of operation, dependent upon usage.  This alarm has been certified laboratory tested to meet Military Spec MIL-STD-810F (516.5) for shock.

The Regulator Flowmeter is preset at 20 psi with a flow capacity of 100 SCFH.  The regulator/flowmeter hose connection is 5/8″-18 Right Hand External “B”. An adapter can be used to convert this regulator/flowgauge connection to 1/4″ NPT Male.  Sold separately on this site.

This alarm is for high-pressure cylinders.  See our A333-CRYO for cryogenic applications.

Additional information

Weight 5 lbs
Dimensions 16 × 8 × 6 in

You may also like…